Heat Shrink Low Voltage Joints

Category: Raychem RPG Tag: Heat Shrink Low Voltage Joints

Specifications

Parameter
High reliability and low skilled features with unlimited shelf life for heat shrink materials
Suitable for wide range of crimp and mechanical connectors
Suitable for single / multi-core, armoured / unarmoured cables
Type tested as per National and International standards

Technical Information

Sr. No.	Particulars	1.1 KV
1.	Rated Voltage of Cable accessories	1.1 kV
2.	Applicable Standards	IS: 13573- Part 1, 2011 / EN50393
3.	Heating Cycle Test in Air	Total cycle = 63 nos.
	a. Each cycle heating duration	5 hours (maintain 2 hrs min as steady state)
	b. Temperature	PVC – 75°C, XLPE – 95°C.
	c. Cooling Duration	3 hours
4.	Heating Cycle Test in Water	Total cycle = 63 nos.
	a. Each cycle heating duration	5 hours (maintain 2 hrs min as steady state)
	b. Temperature	PVC – 75°C, XLPE – 95°C.
	c. Cooling Duration	3 hours
5.	Insulation Resistance Test (Immersed)	50 MΩ (Min)
6.	Insulation Resistance Test (Air)	50 MΩ (Min)
7.	Impact Test for Straight Joints (armoured cables)	No damage
8.	A.C. Voltage Withstand (Water)	4 KV for 1 minute
9.	A.C. Voltage Withstand (Air)	4 KV for 1 minute
10.	Thermal Short Circuit	As per cable cross section and material of conductor
11.	Tubing Material	Heat Shrinkable Type
12.	Di-electric strength of insulating material	10 kV/mm min

Description
Reviews (0)

1.1kV Heat Shrink Joint -conventional and next generation. Raychem products offer excellent insulating and sealing performance with heat shrinkable
materials. These proven materials form the basis of straight and branch joints for voltages up to 1.1 kV and designed for solid dielectric cables (PVC/Rubber/XLPE).